DOLD正品AD5992 DC24V 0032362故障安全繼電器，原裝全新，品質有保證，上海銳譽優惠提供DOLD、PILZ安全繼電器歡迎咨詢；

連接A1，故障指示輸入S1-S3或S1-S6，燈測試輸入
LT和確認輸入Q必須連接到相位連接。
即使沒有連接集體指示燈，也在終端上27連接標稱電壓。

總線H和S承載低電壓，可能不帶任何電壓
可以施加外部電壓。是由共同鋪設的電力線
害怕感應或電容干擾
建議對這些電纜使用屏蔽電纜。
經由閃光條BS的閃爍脈沖由內部觸點提供
產生。應考慮此接觸的最大負載

Hints
The connections A1, fault indication inputs S1 - S3 or S1 - S6, lamp test input
LT and acknowledgment input Q must be connected to the phase
be connected.
Even if no collective indicator light is connected, is on terminal
27 to connect the nominal voltage.
The bus lines H and S carry a low voltage and may not with any
External voltage can be applied. Are by co-laid power lines
to fear inductive or capacitive interference
It is recommended to use shielded cables for these cables.
The flashing pulse via the flashing bar BS is through an internal contact
generated. The maximum load of this contact is to be considered
(Technical specifications).
No lamp transformers may be connected to the fault message outputs
become. This would lead to unwanted fault messages during the lamp test
to lead.

AD5992同系列產品推薦：

DOLD多德 AD5992 AC50/60HZ 115V 0036169
DOLD多德 AD5992 AC50/60HZ 127V 0043659
DOLD多德 AD5992 AC50/60HZ 230V 0032361
DOLD多德 AD5992 AC50/60HZ 24V 0032360
DOLD多德 AD5992 AC50/60HZ 240V 0039674
DOLD多德 AD5992 AC50/60HZ 42V 0042090
DOLD多德 AD5992 DC110V + RV D.FOLG.POS. 0037745
DOLD多德 AD5992 DC125V + RV D.FOLG.POS. 0041089
DOLD多德 AD5992 DC230V + RV D.FOLG.POS. 0050379
DOLD多德 AD5992 DC24V 0032362
DOLD多德 AD5992 DC28-30V 0034904
DOLD多德 AD5992 DC48V + RV D.FOLG.POS. 0057320
DOLD多德 AD5992 DC60V + RV D.FOLG.POS. 0035511